Are you searching for the best antenna analyzer for your ham radio or CB radio system?

I’ve been operating ham radios and CB radios for decades and a high quality antenna analyzer is a necessity for achieving peak range and performance. I’ve reviewed the most popular antenna analyzers on the market and after reading this article you will know my recommendations.

Check the quick list below for links to customer reviews and prices for my best antenna analyzer picks or read on for the full review:

  1. RigExpert AA-1400 Antenna Analyzer 0.1-1400 MHz
  2. MFJ-269C Antenna Analyzer Continuous Coverage
  3. RigExpert AA-600 HF/VHF Antenna Analyzer
  4. RigExpert AA-35 ZOOM HF Antenna Analyzer
  5. Comet Original CAA-500 MARK II Standing Wave Analyzer

Top Rated Antenna Analyzer

After owning and testing dozens of antenna analyzers over the years it has become clear that not all models are worth the investment. With an antenna analyzer it is important that they are consistently accurate, easy to read, and easy to use. I’ve reviewed the top models currently available. You can see the best of the best below.

RigExpert AA-1400 Antenna Analyzer 0.1-1400 MHz

This antenna analyzer is ideal for those needing to tune their amateur radio antennas. It has a frequency range from .1 to 1400MHZ with a frequency entry of 1kHz resolution. This antenna analyzer takes measurements for 25, 50, 75 and 100 Ohms. It’s a great SWR analyzer with a range from 1 to 100 when set to numerical mode and if set to graph mode it goes from 1 to 10. Having the option to choose your display mode is a great feature not found on many other antenna analyzers.

  • Ideal antenna analyzer for amateur radio operators
  • Frequency range from .1 to 1400MHz
  • 1kHz resolution
  • Numerical display mode
  • Graph display mode
  • Excellent consistent performance
  • Exceptional value

MFJ-269C SWR Antenna Analyzer 530 KHz – 230 / 415-470 MHz Continuous Coverage

This antenna analyzer is ideal for those seeking a compact analyzer that is accurate and reliable. This antenna analyzer combines a variable oscillator, frequency multiplier, twelve bit A to D converter, frequency counter, 50 ohm RF bridge, and a microcontroller. This impressive list of features offers a lot of functionality when measuring antenna and RF impedance, even including coaxial cable loss locating the electrical distance to an open or a short. It also features a built in frequency counter, a battery saver mode with a low battery warning. Not only that, this antenna analyzer has a smooth reduction drive tuning and Ni-MH/Ni CD charger circuit. The MFJ-269C is a compact battery powered RF impedance analyzer. It combines five basic circuits; a variable oscillator, frequency counter, frequency multiplier, 50-ohm RF bridge, twelve-bit A-D converter, and a microcontroller. Together, these circuits perform a wide variety of useful antenna and RF impedance measurements including coaxial cable loss and electrical distance to an open or short.

If you need an antenna analyzer with a large LCD screen this one fits the bill. The screen is easy to read with clearly displayed measurements for SWR and return loss and reflection at the same time. It is primarily designed to analyze 50 ohm antennas but it can also handle RF impedance up to hundreds of ohms.

  • Ideal antenna analyzer for those seeking a high performing compact model
  • Variable oscillator, frequency multiplier, twelve bit A to D converter, frequency counter, 50 ohm RF bridge, and a microcontroller
  • Large LCD screen is easy to read measurements
  • 50 ohm antennas and RF impedance analyzed
  • Excellent value

RigExpert AA-600 HF/VHF Antenna Analyzer

This is another antenna analyzer that is ideal for those who need top performance in a portable unit. This antenna analyzer covers frequencies ranging from 0.1 to 600MHz with a frequency entry of 1kHz resolution. It accurately provides measurements for 25, 50, 75, and 100 ohm systems. This antenna analyzer provides swr measurements in numerical mode from 1 to 100 and in graph mode from 1 to 10. It offers you the option to display the measurements in numerical or bar mode. It provides return loss readings at single frequency. This antenna analyzer performed accurately and consistently.

  • Ideal antenna analyzer best suited for amateur radio operators
  • Frequency range of 0.1 to 600 MHz
  • Measurements for 25, 50, 75, and 100 ohm systems
  • Accurate and reliable
  • Excellent value

RigExpert AA-35 ZOOM HF Antenna Analyzer

This is one of the best antenna analyzer models on the market. It performed very accurately and consistently while offering a high quality display screen that is easy to read without a lot of customizing required. This antenna analyzer features a frequency range from 0.06 to 35 MHz with measurements for 25, 50, 75, and 100 ohm systems. This antenna analyzer provides swr measurements ranging from 1 to 10 in chart mode and 1 to 100 in numerical mode. It features a UHF connector type and measures 4.1″ x 8.1″ x 1.4″.

  • Ideal antenna analyzer for those needing high performance with a quality display
  • Measurements for 25, 50, 75, 100 ohm systems
  • SWR measurements in numerical and chart modes
  • One of the best antenna analyzer options in overall performance
  • Excellent value

Comet Original CAA-500 MARK II Standing Wave Analyzer

This is an ideal antenna analyzer for users seeking a straight forward high performing analyzer. It provides a frequency range of 1.8 to 500 MHz including the 222 MHz band. It features an RF output level of 0dBm 1 mW. The swr readings come in analog and digital reading modes. This antenna analyzer provides impedance measurements of 12.5 to 300 ohms. The reactance range is 0 to 500 ohms. The screen includes a battery power indicator with an auto off timer. This antenna analyzer can run for up to nine hours off from six AA batteries but can be plugged in with the included DC power cord. This antenna analyzer measures 3.5″ x 7.75″ x 2.65″ and weighs just over two pounds.

  • Range: 1.8 – 500MHz (including 222MHz band). RF output level: 0dBm 1 mW. Measured SWR Range: Analog meter 1.0 – 6.0:1 , LCD display 1.0 – 9.9:1
  • Impedance measurements: 12.5-300 ohms. Reactance range: 0 – 500 Ohms (absolute value) 1.8 -190MHz. Battery indicator and selectable Auto-Power-Off timer
  • Operates up to 9 hours continuous using six AA Alkaline or NiMH cells (not included). or use an external 8-16VDC 200ma power source (DC cable included) Internal trickle charger option when using NiMH batteries
  • Size: 3.5 x 7.75 x 2.65 inches (overall)
  • Weight: 2lbs 2oz with alkaline batteries installed
  • Ideal antenna analyzer for those seeking best performance without the premium price tag
  • Easy to read screen displays readings in analog or digital modes
  • Frequency range of 1.8 to 500 MHz
  • Impedance measured from 12.5 to 300 ohms
  • Run plugged in or off batteries
  • Excellent value

For more radio guides and tips read these articles:

Here is the quick list for the best antenna analyzer picks one more time. To view prices and customer reviews see the links below.

  1. RigExpert AA-1400 Antenna Analyzer 0.1-1400 MHz
  2. MFJ-269C Antenna Analyzer Continuous Coverage
  3. RigExpert AA-600 HF/VHF Antenna Analyzer
  4. RigExpert AA-35 ZOOM HF Antenna Analyzer
  5. Comet Original CAA-500 MARK II Standing Wave Analyzer
Share on facebook
Share on twitter
Share on pinterest
Share on email
Share on print

Leave a Comment

Your email address will not be published. Required fields are marked *